ECB /ECE /FCB /FCE /FCF Bench Scales ECB ECE High mobility: Battery operation, compact, flat construction and low weight make this scale ideal for the use in several locations. Particularly flat design. Very fast display: steady weight values within 2 sec. Simple and convenient 2-key operation.
FFN Bench Scales Suitable for the ever-increasing hygienic requirements in the food industry. Ideal for the robust industrial application. Your support in a HACCP-compliant quality system. High mobility: thanks to battery operation, compact construction and low weight, it is suitable for use in several locations such as production, kitchen, sales office etc. Stainless steel housing, rust-proof and easy to clean. Recessed grips on the underside of the scale for easy transportation. IP65: Dust and spray protected (only when using rechargeable battery pack)
FKB Bench Scales PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels. Freely programmable weighing unit, e.g. display direct in special units such as length of thread g/m, paper weight g/m2, or similar. Optional battery operation, batteries 6×1.5 V Size C not standard, operating time up to 40 h. High resolution of up to 360000 points it is ideal for high-precision weighing in the industrial field
Bench Scale FKT 80 memories for each operation mode, e.g., for check weighing, PRE-TARE, reference weight, target weight when dispensing etc. Convenient recipe weighing: 99 recipes each with 10 components each can be stored in plain text. If one recipe ingredient is overweight, then the practical recipe adjustment function for when dosages are exceeded automatically calculates the new target weights of the other ingredients. The actual and target values and the proportionate percentage can then be printed. The recipes can be generated easily in an Excel list at the PC and transferred to the balance using the RS-232 interface. Alternatively, the recipes can also be entered directly using the keypad. Rapid function for shortened stabilisation time with reduced readout. 16 print forms which can store up to 20 different information, such as, e.g., date, time, operator, item, net, tare, gross, PCS, target weight, PRE-TARE etc. The print forms can be generated easily in an Excel list in the PC and transferred to the balance using the RS-232 interface. Control outputs (opto coupler, digital I/O) to connect relays, signal lamps, valves etc. (35 V / 80 mA)
Bench Scales FOB / FXN FOB Stainless steel design of the housing and weighing plate. Its smooth surfaces make it simple to clean. Increased protection against humidity by means of waterproof silicone sealing of the load cell, electronics and soldering joints. High mobility: thanks to compact, flat construction, it is suitable for use in several locations . Net/gross weight: to control the consumed weighing range at the touch of a key.
Bench Scale GAB /GAT GAB Compact size, practical for small spaces. High mobility: thanks to battery operation (optional). Weighing with tolerance range (check weighing): Input of an upper/lower limit value. A visual signal assists with portioning, dispensing or grading. Totalising of pieces when counting
Bench Scale WTB Suitable for the ever-increasing hygienic requirements in the food industry. IP65: Dust and spray protected (only when using rechargeable battery pack).Second display on the rear of the balance. Very fast display: steady weight values within 2 sec. Recessed grips on the underside of the scale for easy transportation. Innovative weighing with tolerance range (Check weighing): The colour of the display changes depending on the weight (too light/ok/too heavy) and is an aid to help with portioning dosing and grading
KFA /KFB /KFD /KFN /KFP /KXP Weighing Beams, Platforms & Accessories Multiple different weighing beams, platforms