Tube End Fittings and Thermoelectric Flanging Tools

bola tube flanging tool BOLA Standard Construction Kits
For making flanges at the ends of plastic tubing (e.g. PTFE, PFA or FEP) Consisting of: » 1 x BOLA Thermoelectric Flanging Tool with exchangeable flanging tip for tubing I.D. 0,8 mm » 1 x BOLA Tube End Fitting Set » 5 x BOLA Plugs10 x BOLA Miniature Couplings (straight) » 2 x Miniature Couplings (T) » 1 x BOLA Miniature Coupling (cross) » 1 x 10 metres of PTFE tubing (I.D. 0,8 mm, O.D. 1,6 mm)

 

ptfe tube flanging tip BOLA Flanging Tips
For flanging different inner diameters of tubing, suitable for BOLA Thermoelectric Flanging Tools.

 

 

flanging tool BOLA Thermoelectric Flanging Tools
For making flanges at the ends of plastic tubing (e.g. PTFE, PFA or FEP) with I.D. 0,8 mm. Consisting of: » 1 x Basic flanging tool 230 V / 50 Hz » 1 x Exchangeable flanging tip for flanging tubing I.D. 0,8 mm » 1 x Tubing holder for tubing O.D.1,6 mm (1/16") and 3,2 mm (1/8") .

 

 

bola hplc tube end fittings BOLA Tube End Fittings, PP
Coloured tube end fittings made of PP. With male thread UNF ¼” 28 G; washers made of PA are included in delivery. Packing unit: 10 pieces, differing ordering quantities are rounded up to factor 10.

 

 

ptfe tube end fittings hplc BOLA Tube End Fittings, PTFE
White tube end fittings made of PTFE. With male thread UNF ¼” 28 G; washers made of PA are included in delivery. Packing unit: 10 pieces, differing ordering quantities are rounded up to factor 10.

 

 

ptfe double tube end fitting BOLA Double Tube End Fittings, PTFE
Made of PTFE, with two male threads UNF ¼” 28 G. Packing unit: 10 pieces, differing ordering quantities are rounded up to factor 10.

 

 

ptfe tube end fittings BOLA Assortments of Tube End Fittings, PP
Tube end fittings made of PP in 9 different colours, two fittings per colour. With male thread UNF ¼” 28 G; washers made of PA are included in delivery.Colours: natural, black, orange, yellow, green, blue, violet and grey.

 

 

hplc tube plugs BOLA Plugs, PTFE
Made of PTFE. For closing unused ports of miniature fittings. With male thread UNF ¼” 28 G. Packing unit: 10 pieces, differing ordering quantities are rounded up to factor 10.

 

 

hplc tube holder BOLA Tube holders
For tubing with O.D. 1,6 mm (1/16”) and 3,2 mm (1/8“).

 

 

PA Washers BOLA Washers, PA
Made of PA. For stabilising the flange and avoiding damages when tightening the tube end fitting. Packing unit: 10 pieces, differing ordering quantities are rounded up to factor 10.