vacuum accessories,vacuum gauges,controllers,components,thyracont controllers,vacuubrand,controllers,

Vacuum Control

Thyracont Vacuum Gauges & Controllers

Thyracont vacuum gauges and controllers embody many innovative technologies in pressure sensing and signal processing. A wide range of digital vacuum gauges from 1600mbar to 10-9mbar. Thyracont develops and manufactures intelligent vacuum gauges, controllers and combination transducers for industrial as well as laboratory applications

Thyracont Compact Digital Vacuum Meters VD81 Chemically resistant ceramic sensor with FKM sealing. Vacuum connection by small flange, G1/4 female thread or screw in hose nozzle. High repeatability. Very good long term stability. Battery life time up to 5000 h.
VD83 Temperature compensated, metal sealed Pirani sensor with durable helix filament. Vacuum connection by small flange DN16 ISO-KF. High accuracy. Excellent repeatability. Superior sensor protection against condensed solvents. High battery life due to clocked measurement. Gas correction factors for immaculate pressure readings.
VD 84 Temperature compensated Pirani sensor with durable helix filament. External detachable sensor with stainless steel small flange DN 16 ISO-KF or 1/8″NPT male thread. Excellent reproducibility. Sensor protection against condensed solvents by metal shield. Gas correction factors for correct pressure readings.
VD85 Temperature compensated Pirani sensor with durable helix filament. Wide measuring range due to combined piezo/Pirani sensor. Vacuum connection by small flange DN16 ISO-KF. High precision and optimal resolution over the whole range. Excellent long term stability. Rugged sensor (piezo/Pirani).The Pirani sensor is active only below 200 mbar. Gas correction factors for correct pressure readings

 

Thyracont Smartline Vacuum Transducers VSR Wide measuring range due to combination sensor piezo / Pirani. High accuracy and optimal resolution over the whole measuring range Short response time. Excellent reproducibility and long-term stability. Metal-sealed stainless steel sensor, suitable for UHV applications. Filament is protected against oil and solvent vapours by a metal screen. Stable measurements due to optimized temperature compensation. Small measuring cell volume of 2 cm3. Baud rate 9.6 kBd to 115 kBd. Measurements independent of gas type above 20 mbar and adjustable. Gas type correction factors for Pirani sensor.
VSP Durable Pirani spiral coil filament. High resolution. Good accuracy and excellent reproducibility Short response time. Filament is protected against oil and solvent vapors by a metal screen. Stable measurements due to optimized temperature compensation. Small volume of the measuring cell e. g. 1.8 cm3 for VSP63D. Baud rate 9.6 kBd to 115 kBd. Metal-sealed stainless steel sensor, suitable for UHV applications.
VSI Wide range sensor Pirani / cold cathode. Cold cathode sensor can be switched on and off either automatically or manually by the user. Fast ignition due to a special technology. Low magnetic stray field. Insensitive against inrush of air due to automatic switch-off. Precise pressure readings by means of gas type correction factor
VSM Wide range sensor Pirani / cold cathode. The cold cathode sensor is automatically controlled by the Pirani. Pirani with extended range allows operation of cold cathode at lower pressure and increases lifetime. Correct pressure readings by means of separate gas type correction factors for Pirani and hot cathode. Robust sensor design. Small volume of the measuring cell e. g. 9 cm3 for VSM77D. Excellent ignition behaviour. Insensitive against inrush of air. Baud rate 9.6 kBd to 115 kBd
VSH Wide range combination sensor Pirani / Bayard Alpert. Bayard Alpert with blowing resistant, yttrium coated double filament. Long term tests confirm excellent life time and resistance: up to 100,000 shock venting cycles. The Pirani sensor´ s extended range allows for preserving operation of hot cathode at lower pressure. Activation and deactivation of the hot cathode by the Pirani for enhanced durability. Excellent accuracy and repeatability. Small volume of the measuring cell e. g. 20 cm3 for VSH88D. Baud rate 9.6 kBd to 115 kBd. Correct pressure readings by means of separate gas type correction factors for Pirani and hot cathode

Thyracont Analog Vacuum Transducers with single or wide range combination sensors to measure and transmit pressures from 1400mbar to 10-9 mbar. Analog and digital output signals. Mounting with KF small flange or conflat flange. Integrated sensor, automatic boiling point detection and multiple program modes and fuzzy logic for control of vacuum processes and distillations.

Stable, reproducible measurement values due to optimized temperature compensation. Precise, digital push button digital adjustment of zero. Cost saving. Easy connection to PLCs and other system controllers. Extremely compact, designed for industrial applications

 

 

Thyracont Vacuum Controllers, Gauge Sets and Sensors VD12 Simultaneous control of 2 measuring channels. Can be combined with all Smartline and 0-10 V Analog line transducers. 2 programmable potential-free relay switches.
VD14 Simultaneous control of 4 measuring channels. Can be combined with all Smartline transducers. 4 programmable potential-free relay switches

 



Thyracont Vacuum Switches to sense and switch at pressures between 1000mbar and 0.001mbar. Used to set valves or switch pumps on/off .VRC  Chemically resistant ceramic sensor with FKM sealing, FFKM sealing on request. Dry relay switch point (switch-over relay). High reliability. Excellent reproducibility. Connection to vacuum source by KF small flange or G1/4 female thread. After detaching the top the switch point is exactly adjustable over the whole range by means of a potentiometer. Vacuum compatible connection. Robust metal housing with IP54 protection class
VRP Dry relay switch point (switch-over relay) High reliability. Excellent reproducibility. Economical Pirani measuring principle. Robust Pirani filament with extra long life time. After detaching of the top, the switch point is exactly  adjustable over the whole range by means of a potentiometer. Vacuum compatible connection. Robust metal housing with IP54 protection class




Vacuum System Accessories Cables, vacuum connectors stands, cases and power supplies for all thyracont vacuum systems. Vacuum connectors and KF fittings

 

Vacuubrand Vacuum Gauges, Valves & Controllers
Vacuubrand electronic vacuum gauges using capacitive,piezo-resistive or Pirani technology cover the range of measurement to 10-3 mbar; all gauges and controllers are calibrated and certified under supervision of the German Federal Standards Laboratory.

Vacuubrand Diaphragm Vacuum Gauges The DVR 3 is a fully electronic vacuum gauge with ATEX category 2 approval for use in areas with potentially explosive atmospheres (measured gas and environment of gauge). The DVR 3 has an integrated ceramic diaphragm vacuum sensor for the range from atmospheric pressure to 1 mbar with capacitive readout. The sensor measures independently of the type of gas and is exceptionally resistant to chemicals. It features outstanding measuring accuracy, very low temperature depencence and excellent long-term stability. A particular advantage of the DVR 3 is its cordless, battery-powered operation. Its simple operation and the combined digital / analog vacuum reading for precise readout and quick trend detection, respectively, make the DVR 3 very versatile.
VACUU VIEWFor the monitoring of your vacuum processes in the rough vacuum range, the new vacuum gauges VACUU·VIEW are perfect! Chemically resistant ceramic diaphragm sensor for measurement in the rough vacuum range. VACUU·VIEW provides gas-independent pressure indication with precise capacitive readout. Highest precision in the range from atmosphe down to 0.1 mbar, perfect gauge for all rough vacuum applications Compact design with integrated sensor for useful setup in laboratory and process. Chemically resistant ceramic diaphragm sensor, highly reliable at harsh laboratory conditions even in case of aggressive chemicals. Illuminated display, easy to read. Display with menu driven handling easy to use e.g. for unit settings

 

Vacuubrand Vacuum Controllers DCP 3000The DCP 3000 is an outstanding vacuum gauge with large illuminated display. The VSP 3000 vacuum sensor is based on thermal conductivity (Pirani) and offers a wide measurement range from atmospheric pressure down to 10-3 mbar. The wetted parts are made of chemically resistant plastics (PBT, PUR) and alumina ceramics. It features a much better chemical resistance and ruggedness than conventional Pirani sensors with their fragile metallic spiral-wound filament. Simultaneous connection of up to eight vacuum sensors allows flexible measuring on the spot. The DCP 3000 communicates with external components via the VACUU·BUS® digital bus system. It is characterized by fully automatic configuration, unified plug connections and cable lengths of up to 30 m. In addition the DCP 3000 offers relative pressure measurements (VSK 3000 as reference) and a data logger feature for up to 32,000 data values.