Technical Resources
A selection of web pages with technical information of a general nature about Finemech Products.
kf_adapter DN KF, ISO-K and ISO-F sizes chart with flange drawings and all mm dimensions for DN and ISO standard flanges

Bohlender laboratory Screw Joints

Bohlender Laboratory Screw Joints provide a wide range of fluoroplastic components that are used to attach tubes to bottles, lids, distributors and similar laboratory containers. the components are easily adapted to varying sizes of tubing over a wide range of external diameters.

This section shows by means of sectioned drawings how the joints are assembled. For details of available sizes Bohlender laboratory Screw Joints Sizes

bola technical help


Stirrer Selection Help with different types of stirrer blade configurations.
Stirrer Shafts types and selections including explanation of PTFE cladding
Stirre Speed Rotational speed in relation to size and type of liquid being stirred
Magnetic Stirrer Bars Selecing the corect type and size of magnetic stirrer bar

 
homogenizers

Homogenizer Selection

Homogenizers consist of a drive motor and a generator. For different tasks selecting the correct combination is important. This section has a description and a chart to assist. For additional help eng@finemech.com
chemical_resistance_guide Chemical Resistance Guide Comprehensive list of chemicals and mixtures of chemical. The guide shows the degree of resistance by various polymers used in valve and pump manufacture including PVC, Polypropylene, PTFE and PVDF
Teach In Sensors Description of how the Teach in feature on Ultrasonic sensors works. Diagrams show the procedure for setting and changing sensing positions
Ultrasonic Sensor Applications Descriptions of typical ultrasonic sensor applications with sketches showing how the sensors are mounted and used.
Description of FlouroplasticsText descriptions and full chemical name of the following fluoroplastics; PTFE,PTFE-TFM,FEP,PFA,PCTFE,ETFE,PVDF and PVF Descriptions and full chemical names of the following technical plastics; PPS,PEEK,PP,PA,PS and PMMA. Technical descriptions and full chemical name of the following Elastomers:NBR,FDM,EPDM and FFKM
Overview of Fluoroplastic's properties Includes main physical properties and molecular structure
Properties of Fluoroplastics comprehensive table with main properties of fluoroplastics.
Ultrasonic Sensor Range Charts showing the ranges of different PIL Ultrasonic sensors.
calibration lab Calibration of Balances, Weights and Force Measurement Devices The KERN DKD calibration laboratory (DKD-K-11801) for electronic balances, test weights and force measurement devices has been accredited by DKD since 1994 and today is one of the most modern and best-equipped DKD calibration laboratories in the world for these measurement values.
Thanks to the extremely high level of automation, we are in a position to carry out DKD calibration of non-automatic electronic balances, test weights and force-measuring devices, round the clock.
Vacuum Distillation Vacuubrand pumping Systems for vacuum distillation. Notes on the technique of vacuum distillation and vacuum evaporation.
Vacuum Drying / Gel Drying Applications for vacuum pumps in vacuum drying and gel drying. Uses of vacuum dryers and gel dryers.
Freeze Drying Vacuubrand vacuum Pumps used for freeze drying applications. Selection of pumps and typical application.
Liquid Nitrogen Data page for liquid nitrogen. Contains physical data about phases of Nitrogen, solid, liquid and gaseous.