Coating & Thickness Measurement, Hardness Testers.
Handheld, analog and digital instruments for measuring the thickness of materials and coatings. Hardness meters to measure hardness in Shore or Leeb
Digital Coating Thickness Gauges TB External sensor for difficult-to-access measurements. Base plate and calibration foils included. Delivered in a hard carrying case. Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a superior accuracy of approx. 1 % of the measured value. SAUTER TB 2000-0.1F.: Specifically designed for the automobile industry. Selectable measuring units: µm, inch (mil). Auto-Power-Off
Thickness And Coating Thickness Gauge Accessories A range of accessories for the thickness gauges and the ultrasonic material thickness meters.
Hardness Gauges HN User-friendly operation: The compact version enables the product to be used in a significantly wider range of applications compared with traditional devices. The measuring device has been designed for one-hand operation and this allows the user to work more quickly and flexibly. Modern LCD display: Optimised for industrial applications: increased luminosity and backlight can be switched on, so that the display can be read from any angle. All measurement directions possible (360°) thanks to an automatic compensation function. Internal impact sensor included (Type D). Selectable measuring units: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL). Internal data memory for up to 500 measurements with date and time. USB-PC data output: Easy to install on any PC. Delivered in a hard carrying case
SP, SO Light Measuring Meter; SU; SW Sound Level Meter SP For measuring illumination of office workstations, production workstations. Photo sensor: Silicon diode, filtered. Cosine correction for angular incident light. Data-hold function, to freeze the current measurement. Rotating sensor unit (+ 90 and -180°) for optimum alignment to the light source. Sturdy protective cover for the photo sensor. Increased service life: Impact protection through delivery in a soft box with light protection. TRACK function for continuous recording of variable environmental conditions. Peak Hold Mode to capture peaks. Selectable measuring units: fc (foot-candle), lx. Easy to toggle between units at the press of a button
Force Measurement Gauges
Mechanical Force Measurement Gauges Dual scale: shows Newton and kg. Rotatable display unit for an easy calibration of the instrument. Peak hold function by drag pointer. Can be mounted on all manual test stands. Zeroing by a short push of the switch. Delivered in a hard carrying case
Digital Force Measurement Gauge Turnable display: automatic direction identification. Secure operability due to ergonomic design. Real time or Peak Hold Mode to observe transients or capture peaks. Selectable measuring units: N, lb, kg, oz. Auto-Power-Off. With one of the two optional attachments for tensile strength testing, the SAUTER FK can become a tensiometer for testing the material tension characteristics of cables, threads, wires, twine etc. (see accessories). Standard attachments: as shown below, extension rod: 90 mm. Can be mounted on all SAUTER test stands
FH FL Universal Digital Force Measurement Gauge FH Turnable display with backlight. Can be mounted on all manual test stands. Digital force gauge with internal sensor. Data interface RS-232, included. Standard attachments: as shown below, extension rod: 90 mm. Delivered in a hard carrying case. Selectable measuring units: N, lb, kg. Real time or Peak Hold Mode to observe transients or capture peaks. Function to set limits, programming of Max./Min., in pull and push direction, with output of audible and optical signal. Ideal mode for efficient and accurate testing of standard parts. Auto-Power-Off. Mini Statistics Kit: calculates the average result from up to ten stored single results, min., max., n
Force Measurement Test Stands TVM Premium operation panel:. Digital speed display. Digital repeat function display . Force controlled automatic switch off (Test stop after achieving an adjusted limit load), only when used with force gauge SAUTER FH. Repeat function for durability tests (multiple up and down, adjustable). Digital speed display: shows the displacement speed. Solid and flexible possibilities of fixation (see accessories). Possibilities to attach force gauges (for SAUTER FH, FA, FK, FL):.Force gauges with internal sensor (up to 500 N capacity), only for SAUTER TVM 5000N230N, SAUTER TVM 10KN120N. Force gauges with external sensor (starting at 1,000 N capacity) .Large illustration with length measuring unit, force gauge and mount for test objects (not included).
Clamps A wide range of clamping tools for use with force measuring equipment and test stands