PIL Ultrasonic Sensors

PIL Ultrasonic sensors solve tough sensing problems, detecting targets made of practically any material in difficult environments. Ultrasonic sensors are ideal for presence/absence sensing and precision distance sensing or tracking. They are particularly useful where other sensing technologies have difficulties such as with clear or shiny objects, foggy or particle laden air and splashing liquids and where larger sensors and longer sensing distances are required.

PIL P41 Ultrasonic Teach-in Flat Form Sensors Compact, flat form factor ultrasonic sensors with teach in capability. Very robust plastic (PBTB) housing and IP/76, IP/65 protection class. The P41 range is available in switching and analog outputs and is very cost effective. Wide range of sensing distances from 60mm ( 2.4 in ) to 3500 mm ( 138 in ).

 

 

 

P42 Ultrasonic Sensor Heads with separate evaluation electronics. adjustable with switches and programmable for sensing distances up to from 150mm ( 5.9 in ) to 8000mm ( 315 in ). Evaluation electronics are also listed.
P42 Stainless Steel Ultrasonic Sensors Stainless steel housings, compact design with switching and analog versions. Sensing distances from 100mm ( 4 in ) to 3500mm ( 138 in ).

 

 

 

P42 Ultrasonic Sensors. Programmable ultrasonic sensors with RS232 or RS 485 interfaces. Analog profiles and switch points can be set by an attached PC
P42 Plastic Ultrasonic Sensors Plastic Housings, compact design with switching and analog versions. Sensing distances from 100mm (4 in ) to 3500mm (138 in ).

 

Evaluation Electronics for P42 Sensors Evaluation Electronics for P42 Sensors

 

 

 

P43 Tele-teach Ultrasonic Sensors Connector version Low cost, ultrasonic sensors that allow sensing points and switching points to be defined and varied. Versions are available with sensing ranges that vary between 60 mm (2.4 in) to 6000mm (235 in). Supplied with 5 pin connector
P43 Tele-teach Ultrasonic Sensor Cable Version Versions are available with sensing ranges that vary between 60 mm (2.4 in) to 6000mm (235 in). Supplied with 2 meter long cable43 Tele-teach Ultrasonic Sensors. Miscellaneous Versions These sensors can be used in place of conventional proximity sensors due to the short (< 3mm) dead range. The flat form factor rectangular sensors are compact and can fit in small restricted spaces. 220KHz Ultrasonic Transducer provides P43 sensors in the range from 80mm to 1600 mm sensing distance (3.15 in to 63 in)

 

P44 Ultrasonic Sensors. Teach in with analog output or two switch points. PIL P44 Teach in ultrasonic sensors enable the definition and changing of sensing parameters.

For an explanation of the teach-in process and how sensors are set Teach in sensor operation

 

 

 

PIL P47 Standard ultrasonic sensors with analog outputs (0v-10V or 4mA-20mA) are microprocessor controlled and provide fixed parameter and are available in a wide range of differing sensing ranges with sensing distances from 60mm (2.4in) to 2500mm (98 in).
P47 Standard Ultrasonic Sensors with Switching Outputs. PNP or NPN are processor controlled and provide fixed parameter and are available in a wide range of differing sensing ranges with sensing distances from 60mm (2.4in) to 2500mm (98 in).

 

 

 

PIL P47 Long Range Ultrasonic Sensors in the P47 range, flat, compact ultrasonic sensors with ranges up to 5m ( 195in)

 

 

 

 

P48 Miniature Thru-scan Ultrasonic Sensors compact sensors for detecting objects that pass between them.

 

 

 

PIL P49 Cost Reduced Ultrasonic Sensors available in minumum orders of 50 each for OEM appliactions

 

 

 

 

P53 Robust STEEL HEAD. Housing Stainless Steel (1.4571) M30 or ø 30 with gap-free transitions. Resistance against aggressive media for chemical cleaning. High protection class IP68 / IP69K and increased temperature range up to 80°C. Slim sonic beams at a measuring range up to 1500 mm

Ultrasonic Sensor Mounting Accessories, connectors & Cables Accessories are provided to enhance the performance of ultrasonic sensors. Mounting brackets, deflector plates, connectors and cables .

Inelta Displacement Sensors, Pressure Switches

Inelta develops and produces a range of senors and controls in Ottobrunn, near Munich. With over 15 years experience with the design and application of sensors, Inelta has a variety of custom and standard products. Industrial, medical, aerospace, marine, power plant construction, supply and test labs are among the industries that Inleta successfully serves the Inelta. Ongoing improvements to the existing product portfolio and a steady process to ensure new developments ensure Inelta and its customers are up to date. Inelta is an ISO 9001 certifified company.

Standard Displacement Sensors The displacement sensors operate according to the principle of the differential transformer.For rough environments.Stroke up to 50mm. Protection degree IP65 (IP68) Contactless and wear free.

 

Miniature Displacement Sensors The displacement sensors operate according to the principle of the differential transformer.Housing diameter 4mm. Strokes ±1, ±2,5, ±5 mm. Protection degree IP65. Contactlessand wear free.

 

Displacement Sensor with External Thread. The displacement sensors operate according to the principle of the differential transformer. For rough environment.Housing M12. Strokes 2, 5, 10 mm Protection degree IP65 (opt. IP68). Contactlessand wear free.

 

Displacement Sensors with Integrated Signal Processing The displacement sensors operate according to the principle of the differential transformer.Output 4..20mA / 0..10V. For rough environment. Stroke up to 50mm. Protection degree IP65 (IP68). Contactless and wear free.

Econmy Series Displacement Sensors The displacement sensors operate according to the principle of the differential transformer. Spring return version of economy versionavailable. For rough environment. Stroke: 2mm up to 50mm. Protection degree IP65. Cable connection or plug connection.

 

 

Pressure Switch The mechanical pressure switch has the following features. Micro toggle switch optional as closer or opener. Switched voltage up to 250 VAC. Different adjustable ranges up to 300 bar. Different pressure fittings.

 

 

Inelta Sensor Accessories

Misc‪llaneous Inelta Sensors

Inelta Force Sensors & Signal Conditioners

Inelta develops and produces a range of senors and controls in Ottobrunn, near Munich. With over 15 years experience with the design and application of sensors, Inelta has a variety of custom and standard products. Industrial, medical, aerospace, marine, power plant construction, supply and test labs are among the industries that Inleta successfully serves the Inelta. Ongoing improvements to the existing product portfolio and a steady process to ensure new developments ensure Inelta and its customers are up to date. Inelta is an ISO 9001 certifified company.

Miniature Force Sensors Inelta Force Sensors operate with foil strain gauges (DMS).measuring range from up 100N up to 5 kN. Tension / compression. Rugged construction and small dimensions protection degree: IP54.

 

 

Standard Force Sensors Inelta Force Sensors operate with foil strain gauges (DMS). Measuring range 2kN up to 20 kN. Tension / compression. Rugged construction and small dimensions. Protection degree: IP65

 

 

Force Sensors with Integrated Signal Processing Inelta Force Sensors operate with foil strain gauges (DMS). Measuring range 1 kN up to 10 kN. Compression / tension. Protection degree: IP64

 

 

DIN Rail Mounted Signal Conditioner. Amplification modules for force sensors including DMS full bridges with 5V or 10V bridge supply. For all strain gauge sensors. Temp. coefficient <0,02% F.S./°C. Misc. output signals. Galvanically isolated . DIN Rail mounting.

 

 

Miniature Signal Condtioner Signal conditioning of LVDT d isplacement sensors. Miniature size: 25x25x9 mm. 16-Pin DIL with 2,54 mm-raster (Distance 20,32 mm). Offset, gain settings adjustable with external trimpots. Frequency adjustable by two external resistors. Supply voltage +/- 15 VDC. Compatible for LVDTs with center connection (5 connectors). Center position signal for exact positioning at PIN 6.

 

Linear Actuator Stroke up to 75 mm. High actuation forces. Integrated limit switch. Non-rotating plunger. Self locking plunger. High positioning accuracy

 

 

Front Panel Mounted Motorized Potentiometer Panel mounting. For multiturn potentiometer only Suitable as: setpoint device or rotary actuator .Compact design. Robust aluminum housing.

 

 

PCB or DIN Rail Mounted Motorized PotentiometerPCB mounting (Option: DIN Rail). Option: Endswitches 1-4. Suitable as: setpoint device or rotary actuator. Robust aluminium housing. Gear safety clutch.