emclab spectrophotometers

EMC LAB Spectrophotometer

As manufacturer EMCLAB Instruments offers a wide range of UV/VIS Spectrophotometers single and double beam with extended on-board software as well as Basic, Professional and Analyst PC software. EMCLAB spectrophotometers are supplied with works calibration certificate which is based on DAkkS reference materials and NIST traceable. Qualified service partners offer an excellent after-sales service for all EMCLAB products.

  • Can display standard curve and the curve equation (from EMC-3 series on)
  • System can also save the test results. Total groups of data
    and 200 standard curves can be saved; it is convenient for
    check and reload.
  • Data can be restored after a sudden power cut (from EMC-11 series on)
  • Auto setting wavelength (from EMC 11 series on)
  • Tungsten lamp & Deuterium lamp can be turned on/off
    individually to extend lifetime
  • Pre-aligned design makes it convenient to change lamps
  • Large sample compartment, it can be accommodate 5-100 mm
    path length cuvettes with optional holders. A variety of optional
    accessories are available
  • The Professional PC software provides complete control of the spectrophotometer through the built-in USB port. You can achieve the following functions:
    I. Quantitative II. Kinetics III. Wavelength Scan IV. Multi Wavelength V. DNA/Protein
  • The Analyst PC software provided more functions for complete control of the spectrophotometer through the built-in USB port. You can achieve the following functions:
    I. Quantitative II. Kinetics III. Wavelength Scan IV. Multi Wavelength V. DNA/Protein VI. Photometric VII. System Utility
  • IQ - all EMC-spectrophotometrs are identified manufacturing, storage, tested, instructions all documents, software are tested accordingly for extended Installation Qualification IQ.
  • OQ - all EMC-spectrophotometers are selftesting in operation to identification of all parts and systems during switched on instruments. all inspections are done automaticaly after switch on and during measuring. Reference and control filters are available for photometric and wavelength accuracy, stray ligth and spectral resolution for Operation Qualification OQ.