| . SR
50 Series Pressure Regulating (Reducing) Valves maintain a set
downstream pressure independently of a higher pressure upstream.
As the upstream pressure increases to the set pressure, the valve
closes; it opens when the downstream pressure falls below the set
pressure. The SR 50 valves are sensitive and provide precise control,
protecting items from damaging pressure surges. |
 |
SR
50 Pressure Regulating (Reducing) Valves, PVC Body
SR
50 Pressure Regulating (Reducing) Valves, PP
Body
SR 50 Pressure
Regulating ( Reducing) Valves. PVDF Body
 For
SR 50 Series 1/2" to 2" Valves
For
SR50 Series 2-1/2" & 3" Valves
|
AR Series Air Release (venting) Valve allow gases to escape from un pressurized pipe lines. As the un pressurized air vents, liquid rises to the float (an inverted cup), which lifts the float up against the seat, holding liquid pressure. The float will not release until the pressure on the inlet side of the valve is equal to the outlet pressure of the valve (normally atmospheric). |
. 700
Series plastic diaphragm valves with PVC, CPVC, PP and PVDF bodies.
Diaphragms in EPDM, Viton or Teflon. A range of sizes and ends
from 1/2in to 4in is available. Call or sales@finemech.com for specifications, avaialablity and prices
|
| SM Series ball valves are designed for exact dosing of neutral and aggressive clean fluids.
1/2in and 3/4in sizes; PVC or Polypropylene bodies.
|
| Ideal
for plastic piping systems, they provide a combination of accurate
flow measurement and clear flow indication from a distance.The
units must be installed vertically with the flow upwards. Tube
materials are available in clear PVC, Polyamide(PA), Polysulfone(PSU)
and PVDF. The flow meters are accurate to ±3% of indicated
value and ±1% of full scale |
SG Series Gauge Isolators allow inexpensive pressure gauges, or any other pressure instrument to be used in corrosive services. The upper chamber (gauge side) is filled with a stable fluid such as glycerine‡. A diaphragm separates it from the lower chamber which receives the media under pressure.
The 1/2" gauge connection allows use of the popular 4" and 4-1/2" diameter gauges. Pressure switches or transmitters may also be installed. Customers can easily fill isolators and install their own gauges. |
