Back Pressure Valves
Relief Valves

Wafer Check Valves

Plastic Flow Meters
Gauge Isolators
Pressure Reduce Valves
Metering Ball Valves

 

Plastic Valves

SB Series Plastic Back Pressure / Relief Valves. As a back pressure valve, installed in-line downstream of a pump, the back pressure below the metering pump is maintained. When installed in the branch of a tee the valve is a pressure relief valve. The valve stays closed until inlet pressure reaches the set pressure which is adjusted by turning the spring tensioning bolt. Inlet pressure acts upward against the piston allowing excess pressure to flow upwards through the orifice.

SB10 BACK PRESSURE RELIEF VALVE
SB 10 Series

SB10 Series Back Pressure / Relief Valves. For clean fluids with setting pressures from 3 psi to 60 psi. Select range in PVC, CPVC, Polypropylene or PVDF bodies. The SB 10 Series is very sensitive to pressure changes and requires low overpressure to open fully.
SB10 Series Back Pressure / Relief Valves, PVC Bodies
SB10 Series Back Pressure / Relief Valves, PP Bodies
SB10 Series Back Pressure / Relief Valves, PVDF Bodies

For SB 10 Series

SB10 BACK PRESSURE RELIEF VALVE
SB 11 Series

SB11 Series Back Pressure/Relief Valves. For clean fluids with setting pressures from 7psi to 150 psi. Select range in PVC, Polypropylene or PVDF bodies. The SB 11 Series is very sensitive to pressure changes and requires low overpressure to open fully.
SB11 Series Back Pressure / Relief Valves, PVC Bodies
SB11 Series Back Pressure / Relief Valves, PP Bodies
SB11 Series Back Pressure / Relief Valves, PVDF Bodies

For SB 11 Series

SB10 BACK PRESSURE RELIEF VALVE
SB 11 Series

SB12 Series Back Pressure/Relief Valves. For dirty fluids. Setting pressures for 1/2" to 2" from 5psi to 150 psi; for 2-1/2" & 3" from 7.5 psi to 150 psi and for 4" from 7.5 psi to 90 psi. Select range in PVC, Polypropylene or PVDF bodies. The SB 12 series have a built in check valve function.
SB 12 Series Back Pressure / Relief Valves, PVC Bodies
SB 12 Series Back Pressure / Relief Valves, PP Bodies
SB 12 Series Back Pressure / Relief Valves. PVDF Bodies

For SB 12 Series 1/2" to 2"

For SB 12 Series 2-1/2" to 4"

SB17 SMALL PLASTIC BACK PRESSURE VALVE

SB17 Series Miniature Back Pressure/Relief Valves. Compact low cost versions of the SB12 Series. PVC or PP bodies, 1/4in and 3/8 in sizes. setting pressure from 3psi to 80 psi.

SB17 Series Miniature Back Pressure/Relief Valves

For SB 17 Series

large plastic ball valve Large Size 4" & 6" Ball Valves       

Pneumatic Actuators and Electric Actuators
plastic wafer check valve

WP Wafer Check Valves WP Series Wafer Check Valve is a non-return valve ideal for limited space installations.

Wafer Check Valves 2" to 12" sizes. PVC

Wafer Check Valves, 2" to 12" sizes, Polypropylene

Wafer Check Valves, 2" to 12", PVDF

pw wafer check valve

PW Wafer Check Valves This wafer check does not require a separate spacer or flange gaskets. The large orifice and full flow design means low pressure drop. Spring assisted disc closure is standard as well as an optical indication of disc open/close position.

PW Series Wafer Check Valves. PVC
PW Series Wafer Check Valves. Polypropylene Bodies
PW Series Wafer Check Valves. Glass Filled Polypropylene Bodies
PW Wafer Check Valves PVDF Bodies

For PW Wafer Check Valves