| Homogenizers a
wide range of homogenizer motors and drive units with interchangeable
generators. Select a motor/drive unit and the desired stainless
steel homogenizer/dispersing tools. High power electric drive
units and air motors for speeds up to 45000RPM. Tools with fine,
medium coarse and knife blades each with a range of shaft lengths.
Tools are available with teflon or slip ring bearings. |
 |
| Homogenizer
Accessories exchangeable homogenizer blades
and shafts. Replacements, spares and alternatives for the
homogenizer tools. |
|
 |
Hotplate
Magnetic Stirrers provide a combined heating
and magnetic stirring capability. The units available
range from simple low powered magnetic stirrers with Ceran
or Eloxal hotplates to sophisticated processor controlled
combination stirrers. Al units are in stainless steel cases
and are engineered for long life and laboratory use. |
| Magnetic
Stirrers provided with stainless steel cases;
there are versions with speed control. Speed ranges are
available from 500 RPM through 1600RPM with motor powers
from the simplest at 5W through the M30 at 65 Watts for
fluid volumes up to 100 liters. |
 |
 |
Hotplates
and Heaters for temperature ranges from 40° C
to 300° C. From the sophisticated processor controlled
versions with Ceran hotplate to a simple 4 KW unit with aluminum
hotplate. a complete range of heating units for the laboratory. |
| Shakers provide
a means for automatically shaking laboratory sample. The units
are available with a range of different shaking actions fro wrist
action to orbital. Shaking frequencies range from 10/min to 2800
/ min. There are adaptors available for holding a range of different
types of flasks such as test tubes, Erlenmeyer Flasks and round
bottomed flasks. |
 |
 |
Shaking
Heaters are combined shakers and hotplate units.
Full controls are available to manage the shaking and heating
cycles. Speeds from 50 /min to 1100/min. Precision temperature
control. |
| Horizontal
Mixers with coated rollers for synchronized
rocking and rotating of test tubes. |
 |
 |
Overhead
Stirring Motors includes the R-100 Series of
high torque stirring motors for up to 200 liters of fluid
(water viscosity).Sped range is from 40RPM to 2000RPM and
power from 180 Watts to 220 Watts. Smaller motors are also
available with power from 3 watts hand held to the R 50 range
at 85 Watts. Speeds from 750 RPM to 2000 RPM. The stirring
motors can accommodates shafts up to 10.5 mm |
| Stirring
Paddles for a wide range of stirring tasks.
The paddles are propeller type, centrifugal type or blade
type and are available with shaft lengths from 300mm to 500mm
and shaft diameters from 6mm to 10mm. The paddle sizes range
from 50mm diameter to 100mm diameter |
 |
 |
Liquid
Dispensers Automatic powered liquid dispensing
units that deliver highly accurate amounts of liquid. Microprocessor
controlled for flexibility and precision and data collection.
Other motorized burettes can deliver amounts from 0.01mL
though 9999.99 mL. Accessories are available for remote control,
foot control, PC connection and adapters for different bottle
threads. |
