Stirrer Bearings

ptfe stirrer bearing BOLA Stirrer Bearings, PTFE
The sealing rings on these bearings ensure a perfect sealing. The ground joint no longer sticks, the danger of breaking is reduced and the cone can be removed easily from the socket. A special gasket made of PTFE and an FPM O-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing.

glass stirrer bearing PTFE BOLA Glass Stirrer Bearings,
Combination of a borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made of PPS. The special gasket made of PTFE and an FPM O-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing.

glass bearing BOLA Replacement Glass Parts, Glass
Borosilicate glass with ground joint and GL thread.

 

ptfe stirrer bearing BOLA Replacement Shaft Guides, PTFE, FPM
With integrated, exchangeable special gasket made of PTFE and an FPM O-ring.

 

bearing gaskets BOLA Special Gaskets, FPM, PTFE
Easily exchangeable combination of PTFE gasket with FPM O-ring for PTFE shaft guides. The gaskets provide sealing of the stirrer shafts.

 

bearing screw caps BOLA Replacement Screw Caps, PPS
Screw caps compress the O-ring of the special gasket and provide sealing of the stirrer shaft.

 

ultra stirrer bearing BOLA Ultra-Stirrer Bearings, PTFE
Combination of a borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a pressure screw made of PTFE with glass fibre.

 

glass stirrer bearing BOLA Glass Stirrer Bearings, PTFE
Combination of a borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made of PPS. The special gasket made of PTFE and an FPM O-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing.

 

ptfe stirrer bearing BOLA Stirrer Bearings, PTFE
The sealing rings on these bearings ensure a perfect sealing. The ground joint no longer sticks, the danger of breaking is reduced and the cone can be removed easily from the socket. A special gasket made of PTFE and an FPM O-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing.

 

stirrer bearing BOLA Special Stirrer Bearings, PTFE
The 29/32 ground joint of these bearings provides a safe seat in the reactor lid. The stirrer shaft is held by an invisible shaft guide made of borosilicate glass which has an adjustable vacuum sealing. The stirrer can be adjusted in height by means of a lock nut. There is no abrasion. A cooling tank for an optional lubricant against overheating is also included. Suitable for vacuum up to at least 700 mm Hg and for low overpressure. Speeds of up to 500 rpm – temporarily even 1000 rpm - are admissible.