KERN Laboratory Balances


KERN offers a large selection of high-end quality laboratory balances. From precision balances, density determination scales and halogen moisture analyzers to verifiable half micro-analytical balances.

Analytical Balance ABS / ABJ /ABT Dosage aid: High-stability mode and other filter settings can be selected .Simple recipe weighing and documenting with a combined tare/print function. In addition, the ingredients for the recipe are numbered automatically and printed out with their corresponding number and nominal weight .Identification number: 4 digits, printed on calibration protocol freely programmable. Automatic data output to the PC/printer each time the balance has obtained a stable weighing result ABJ-NM has OIML certification

Single-cell advanced technology:
Fully automatic manufactured weighing cell from one piece of material. Stable temperature behaviour. Short stabilisation time: Steady weight values within approx. 3 sec under laboratory conditions. Shock proof constructionHigh corner load performance

 

 

Analytical Balances ADB / AEJ /AES . ADB Large glass draft shield with 3 sliding doors for easy access to the items being weighed. Compact size, practical for small spaces. Simple and convenient 6-key operation.
AEJ / AES Intuitive pipette calibration function to ensure data integrity and to minimise the risks in the daily work with your pipettes. Vmin: 10% of the volume.. Va: Arithmetic mean. Es: Systematic error Vmax: 100 of the volume. Sr: Standard deviation
Higher weighing speed by switching off the last digit
Modern all glass draught wind shield for ideal visibility of the weighing object
Dispensing mode: By pressing one key you can set all relevant parameters for dispensing
Alibi memory: Paperless archiving of up to 100,000 weighing results. 1nternal memory for up to 999 weighing results, 1000 items or recipe ingredients, 100 container weights, 100 users.


Analytical Balances ALJ / ALS NEW: KERN ALJ 200-5DA High-precision semi-micro analytical balance. NEW: KERN ALJ-A03 Ioniser to neutralise electrostatic charge for fixed installation in the analytical balance.
Only ALJ-A: Automatic internal adjustment in the case of a change in temperature > 1.5 °C
Ergonomically optimised keypad for left and right handed users. Large glass draught shield with 3 sliding doors for easy access to the items being weighed. Percentage determination: makes it possible to store a given weight value (100 %) and to determine deviations from this target value. Weighing with tolerance range, ideal for portioning, dispensing, grading

 


Moisture Analyzers DAB - Backlit LCD display, digit height 14 mm. Halogen quartz glass heater 400 W. Observation window above the sample, useful during initial setting. Internal memory for automatic sequence of 15 complete drying processes and 5 drying processes carried out. The last value measured remains on the display until it is replaced by a new measurement.

DBS - Halogen quartz glass heater 400 W. Observation window above the sample, useful during initial setting. Internal memory for automatic run of 10 drying programs and 100 drying processes already executed. The last value measured remains on the display until it is replaced by a new measurement. Sample description for up to 99 samples, 2 digits, freely programmable, and is printed in the measuring protocol. Date and time display as standard. 10 sample plates included.

DLB - Halogen quartz glass heater 400 W. Internal memory for automatic sequence of 5 complete drying processes. The last value measured remains on the display until it is replaced by a new measurement. 10 sample plates included
MLS-D Infrared heater 400 W. Observation window above the sample, useful during initial setting. Balance contains memory for automatic sequence of 100 complete drying programs (92 drying programs with optimised drying characteristics for rapid sample warming and therefore shorter drying times, pre-installed at the factory), 100 users with related authorisations, 1000 drying processes performed and 1000 weighing results (alibi memory). The last value measured remains on the display until it is replaced by a new measurement. 10 sample plates included. KERN MLS 50-3D110V: Version with integrated 110 V power supply.

Kern Calibration Not only the wide range of products around the metrology records KERN as a reliable partner, but also since 1994 by DAkkS accredited, ultramodern laboratory. Best equipment and a high degree of automation allow the DAkkS / DKD calibration of balances and test and factory calibrations (ISO) of force gauges - 24 hours a day, 7 days a week. Besides calibration, we also take care of the recalibration of your balances and weights (E2 - M1). To obtain measurement technology and testing services from a single source - quickly and accurately.

 

KERN Precision Balances


Precision Balances KERN offers a large selection of high-end quality laboratory balances. Precision balances provide highly accurate weighing. The displays are easy to read and provide step by step user instructions. Balances can be calibrated by the factory prior to shipment and supplied with a German Government laboratory certificate (DKD Calibration)

440 Precision Balance Compact size, practical for small spaces. Percentage determination: makes it possible to store a given weight value (100 %) and to determine deviations from this target value. Ring-shaped draught shield standard, only for models with weighing plate size , weighing space Dia xH 90×40 mm

 


572 /573 Precision Balance 572 The robust version, typical industrial functions, such as piece-counting, vibration-free weighing and the large weighing ranges also make these balances ideal for all industrial applications, where a high level of precision is required. Freely programmable weighing unit, e.g. display direct in special units such as length of thread g/m, grammage g/m2, or similar. The robust aluminium cast housing maintains the stability, protects the weighing technology elements and is robust enough to cope with everyday use. Ring-shaped draft shield standard for models with weighing plate size Ø 106 mm. Weighing space Dia. X H 15mm×43 mm. Hook for underfloor weighing standard on all models with readout [d] = 0,01 g. Protective working cover included with delivery.

573 Simple "step-by-step" user guidance in the display. Numerical subtraction of tare weight for known container weight. Useful for checking fill-levels. Precise counting: The automatic optimisation of reference weight gradually improves the average value of the piece weight


EMB /EMS Precision Balances Simple and convenient 2-key operation, making them ideal for use in schools and universities. Tare function facilitates formulation work. Particularly flat design. Secure and non-slip positioning with rubber feet. Ready for use: Batteries included. AUTO-OFF function to preserve the batteries, can be switched off. Ring-shaped draught shield standard, only for models with weighing plate size , weighing space Dia. X H 96×35 mm. Hook for underfloor weighing standard
KERN model EMB 500-1BE available as special "Black Edition" version
KERN model EMB 500-1GN available as special "Gnome-Edition" version


EW / EWJ Precision Balances EW Stable temperature behaviour. Short stabilisation time. Shock proof construction. High corner load performance. Capacity display: A bar lights up to show how much of the weighing range is still available. Precise counting: The automatic reference weight optimisation of reference weight gradually improves the average piece weight value. GLP/ISO record keeping of weight values. Percentage determination. Totalising of pieces when counting. Draught shield standard for models with weighing plate size Dia. 118 mm, weighing space W x D x H 158×130×78 mm. Protective working cover included with delivery.
EWJ Easy to use: All primary functions have their own key on the keypad. Automatic internal adjustment time-controlled every 2 hours. Guarantees high degree of accuracy and makes the balance independent of its location. Capacity display: A bar lights up to show how much of the weighing range is still available. Draught shield standard on all models with [Max] = 600 g, weighing space WxDxH 145×160×80 mm. USB data interfaces for transferring weighing data to the PC, printer, USB sticks, etc.


KB /KJ Precision Balances Many typical laboratory functions, such as, for example, recipe function, percentage determination, GLP record keeping, combined with the high level of precision, the KERN KB is a reliable partner for day-to-day work in the laboratory. User guidance step by step on display by Yes/No dialogue. Freely programmable weighing unit, e.g. display direct in special units such as length of thread g/m, paper weight g/m2, or similar. Ring-shaped draught shield standard, only for models with weighing plate size Ø 81 mm, weighing space Dia. x H 90×40 mm .Protective working covers standard

 

 

Precision Balances PCB PCD PBS/PBJ PBS PBS / PBJ Capacity display: A bar lights up to show how much of the weighing range is still available. Metal housing: robust and sturdy. Dosage aid: High-stability mode and other filter settings can be selected. Weighing with tolerance range (check weighing): Input of an upper/lower limit value. A visual signal assists with portioning, dispensing or grading. Totalising of individual weighing results. Identification number: 4 digits, printed on calibration protocol freely programmable. Automatic data output to the PC/printer each time the balance is steady. Draught shield standard, on all models with readout [d] = 0,001 g, weighing space WxDxH 180×193×87mm.
PCB PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels. Freely programmable weighing unit, e.g. display direct in special units such as length of thread g/m, paper weight g/m2, or similar. With the recipe function you can weigh the different ingredients of a mixture. As a check, you can also call up the total weight of all the ingredients. Plus/minus weighing procedures. Ring-shaped draught shield standard, only for models with weighing plate size , weighing space ØxH 90×40 mm
PCD Laboratory balance with separate platform: Ideal when working in a glove bag or under laboratory fume hoods. Particularly practical for weighing toxic, volatile or contaminated substances. PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels Freely programmable weighing unit, e.g. display direct in special units such as length of thread g/m, paper weight g/m2, or similar. Level indicator and levelling feet for precise levelling of the scale, fitted as standard, to give the most accurate weighing results. Draught shield standard for models with weighing plate size Ø 105 mm

Precision Balances PES /PEJ PET Only PEJ: Automatic internal adjustment
Metal housing: robust and sturdy. Weighing with tolerance range (check weighing): Input of 2 upper and 2 lower limit values through 4 arrow keys. An audible signal assists with the portioning, dispensing or grading. Draught shield[/] standard on all models with readout [d] = 0,001 g. weighing space W x D x H 170×150×100mm. Underfloor weighing: load support with hook on the underside of the balance

 


PFB Precision Balances Easy to use: All primary functions have their own key on the keypad. Compact size, practical for small spaces. Capacity display: A bar lights up to show how much of the weighing range is still available. Level indicator and levelling feet for precise levelling of the scale, fitted as standard, to give the most accurate weighing results. Draught shield standard (only for models with weighing plate size Ø 80 mm and 120 mm). weighing space WxDxH 158×143×64 mm. Separate second display standard for models PFB 600-1M and PFB 6000-0M. Suitable for direct sales to the public. The verification value is the same as the readout. Large backlit LCD display, digit height 16 mm. Interface cable to the balance, cable length approx. 1 m, standard. Dimensions W×D×H 250×180×105 mm

 


PLJ /PLS /PNJ Precision Balances Ideal for mobile applications which require verification, such as ambulatory gold and jewellery purchasing
New: PLJ 2000-3A high-quality milligram balance with enormous weighing range up to 2100 g – ideal for large samples or heavy tare containers. Ergonomically optimised keypad for left and right handed users
KERN PLJ: Automatic internal adjustment, guarantees high degree of accuracy and makes the balance independent of its location of use. Ideal for mobile applications which require verification, such as ambulatory gold and jewellery purchasing.
KERN PLS: Adjusting program CAL for quick setting of the balance accuracy, external test weights at an additional price. Draft shield standard for models with weighing plate size Ø 110 mm, weighing space ØxH 60×150 mm

 

Pocket Balances


TAB /TCB /TEB /TEE Pocket Balances TAB Simple and convenient 4-key operation. Can be switched over from g to ct, gn at the touch of a key. Hard case cover as protection against pressure and dust. Adjusting weight and weighing pan standard
Technical data. Batteries 4×1.5 V AAA standard, operating time up to 150 h. Overall dimensions W×D×H 95×135×33 m. Permissible ambient temperature 10 °C / 30 °C. Net weight approx. 170 g.
TAB Simple and convenient 2-key operation. Small and handy. Transport box and weighing pan included. Revolving weighing plate (as overload protection).
TEE Simple and convenient 2-key operation. Cover made of shock proof plastic as protection against pressure and dust. Can also be used as a tare cup

 

Pocket Scale CM Hard case cover as protection against pressure and dust. Integrated calculator
Technical data. Batteries 2×1.5 V AAA standard. Dimensions weighing surface WxD 70×80 mm. Dimensions housing WxDxH 85×130×25 mm. Net weight approx. 180 g

 

 

Bench Scales


ECB /ECE /FCB /FCE /FCF Bench Scales ECB ECE High mobility: Battery operation, compact, flat construction and low weight make this scale ideal for the use in several locations. Particularly flat design. Very fast display: steady weight values within 2 sec. Simple and convenient 2-key operation.
FCB Second display on the rear of the balance. PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels. High mobility: Battery operation, compact construction and low weight make this balance ideal for use in several locations (production, warehouse, dispatch department.
FCE Simple and convenient 2-key operation. Very fast display: steady weight values within 2 sec. Ideal as a compact letter and parcel scale, especially where space is limited. Ideal as a grading, commissioning or simple check weighing scale in production or dispatch.
FCF Simple and convenient 5-key operation. Very fast display: steady weight values within 2 sec. Compact letter and parcel scale, especially where space is at a premium. Grading or commissioning balance or simple check weighing in production or dispatch

 

FFN Bench Scales Suitable for the ever-increasing hygienic requirements in the food industry. Ideal for the robust industrial application. Your support in a HACCP-compliant quality system. High mobility: thanks to battery operation, compact construction and low weight, it is suitable for use in several locations such as production, kitchen, sales office etc. Stainless steel housing, rust-proof and easy to clean. Recessed grips on the underside of the scale for easy transportation. IP65: Dust and spray protected (only when using rechargeable battery pack)

 

 

FKB Bench Scales PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels. Freely programmable weighing unit, e.g. display direct in special units such as length of thread g/m, paper weight g/m2, or similar. Optional battery operation, batteries 6×1.5 V Size C not standard, operating time up to 40 h. High resolution of up to 360000 points it is ideal for high-precision weighing in the industrial field

 

 

Bench Scale FKT 80 memories for each operation mode, e.g., for check weighing, PRE-TARE, reference weight, target weight when dispensing etc. Convenient recipe weighing: 99 recipes each with 10 components each can be stored in plain text. If one recipe ingredient is overweight, then the practical recipe adjustment function for when dosages are exceeded automatically calculates the new target weights of the other ingredients. The actual and target values and the proportionate percentage can then be printed. The recipes can be generated easily in an Excel list at the PC and transferred to the balance using the RS-232 interface. Alternatively, the recipes can also be entered directly using the keypad. Rapid function for shortened stabilisation time with reduced readout. 16 print forms which can store up to 20 different information, such as, e.g., date, time, operator, item, net, tare, gross, PCS, target weight, PRE-TARE etc. The print forms can be generated easily in an Excel list in the PC and transferred to the balance using the RS-232 interface. Control outputs (opto coupler, digital I/O) to connect relays, signal lamps, valves etc. (35 V / 80 mA)

 

Bench Scales FOB / FXN FOB Stainless steel design of the housing and weighing plate. Its smooth surfaces make it simple to clean. Increased protection against humidity by means of waterproof silicone sealing of the load cell, electronics and soldering joints. High mobility: thanks to compact, flat construction, it is suitable for use in several locations . Net/gross weight: to control the consumed weighing range at the touch of a key.
FOB-NS FOB-S FOB-N Stainless steel design of the housing and weighing plate. Its smooth surfaces make it simple to clean. Particularly flat design. Secure and non-slip positioning with rubber feet. IP65: Dust and spray protected (only when using battery) Ready for use: battery 9 V Block standard. Operating time up to >24 h

 

Bench Scale GAB /GAT GAB Compact size, practical for small spaces. High mobility: thanks to battery operation (optional). Weighing with tolerance range (check weighing): Input of an upper/lower limit value. A visual signal assists with portioning, dispensing or grading. Totalising of pieces when counting
GAT High-quality, rapid processors allow efficient, delay-free operation. Thanks to the intuitive touchscreen concept and multi-lingual operation (DE, GB, FR, IT, ES, PT, NL, FI, PL, RUS, SE, CZ) the balance can be used easily by inexperienced users, straightaway. Convenient recipe weighing. Take-Off function: allows you to remove the same quantity every time, e.g. when portioning in cafeterias or when picking small parts. A colour bar graph shows whether the quantity removed is below the limit or within the specified tolerances (blue) or is above the limit (red).Classifying: Similar objects are automatically classified according to their weight into predetermined classes. Convenient piece-counting function. Fill-to-target function: target quantity or target weight can be programmed, e.g. for check weighing. A colour bar graph shows whether the quantity removed is below the limit (blue), is within the specified tolerances (green) or is above the limit (red). This means that the same target value can always be counted and picked, efficiently and accurately

 

Bench Scale WTB Suitable for the ever-increasing hygienic requirements in the food industry. IP65: Dust and spray protected (only when using rechargeable battery pack).Second display on the rear of the balance. Very fast display: steady weight values within 2 sec. Recessed grips on the underside of the scale for easy transportation. Innovative weighing with tolerance range (Check weighing): The colour of the display changes depending on the weight (too light/ok/too heavy) and is an aid to help with portioning dosing and grading

 

 

KFA /KFB /KFD /KFN /KFP /KXP Weighing Beams, Platforms & Accessories Multiple different weighing beams, platforms

 

 

Floor Scales & Pallet Scales


BBB /BFA /BFB Floor Scales BBB Industrial quality: heavy version for tough usage in industrial applications. Weighing bridge: corrugated steel plate, protection against dust and water splashes IP67, 4 silicone-coated steel load cells. Weighing bridge can also be delivered as components without the display device, KXP V20 IP67. Easy levelling of the weighing bridge as well as access to the junction box from above. Stainless steel touchscreen display KERN KEN-TM for easy entry and reading of, for example, item data, tare weights, reference weights, limit values, etc. protection against dust and water splashes IP66. Benchtop stand incl. wall mount for display device as standard. 1 GB large internal memory, 64 MB large RAM memory
KERN BFA: Weighing plate screwed on from the top, so it easy to remove, hygienic and easy to clean
KERN BFA: Weighing bridge corrugated steel plate welded, 4 silicone-coated steel load cells, protection against dust and water splashes IP67
KERN BFA-N: Weighing bridge steel, lacquered, 4 silicone-coated steel load cells, protection against dust and water splashes IP67
BFB Weighing bridge: corrugated steel plate, protection against dust and water splashes IP67, 4 silicone-coated steel load cells. Weighing bridge can also be delivered as components without the display device KERN KFP-V20 IP67. Easy levelling of the weighing bridge as well as access to the junction box from above. Display device: KERN KFB-TM. Benchtop stand incl. wall mount for display device as standard. Totalising of weights and piece counts

BFS /BIC /BKN /BXS Floor Scales BFS Industrial quality: because of its stable construction, it is ideal for continuous use in robust industrial applications. Weighing plate screwed on from the top, so it easy to remove, hygienic and easy to clean. Weighing bridge: corrugated steel plate welded, protection against dust and water splashes IP67, 4 silicone-coated steel load cells. Weighing bridge can also be delivered as components without the display device, KXP V20 IP67Easy levelling of the weighing bridge as well as access to the junction box from above. Display device with large keypad and 3 high-contrast LCD display for easy entry and reading of, e.g., tare weights, reference weights, limit values etc. when piece counting. The display device can also be delivered as a component without the weighing bridge, KFS-TM. Benchtop stand incl. wall mount for display device as standard. 100 item memories for master data, such as item number, PRE-TARE (container weight), reference quantity, refere. Weight.
BIC Weighing bridge: anti-slip corrugated steel plate, 4 silicone-coated steel load cells, protection against dust and water splashes IP67. Easy levelling of the weighing bridge as well as access to the junction box from above. Simple and convenient 4-key operation. Benchtop stand incl. wall mount for display device as standard.
BKN Weighing bridge: stainless steel, extremely resistant to bending due to material thickness. Easy levelling of the weighing bridge as well as access to the junction box from above. Weighing with tolerance range (check weighing): Input of an upper/lower limit value. A visual and audible signal assists with portioning dispensing or grading. Totalising of weights and piece counts.
BXS Industrial quality: heavy version for tough usage in industrial applications. Weighing plate screwed on from the top, so it easy to remove, hygienic and easy to clean. Weighing bridge: steel, lacquered, extremely resistant to bending due to material thickness. protection against dust and water splashes IP67, 4 silicone-coated steel load cells. Weighing bridge can also be delivered as components without the display device, KXP V20 IP67. Display device: stainless steel, protection against dust and water splashes IP68, for industrial applications, hygienic and easy to clean, with integrated power supply. The display device can also be delivered as a component without the weighing bridge, KXS-TM

NBB /NFB Drive Through Scales NBB Robust drive-through scale for rapid weighing of e.g. wire cage trolleys, shelf trolleys, container trolleys, storage trolleys, sack trucks, transpallets, mobile containers, containers refuse. Weighing bridge: anti-slip corrugated steel plate, protection against dust and water splashes IP67, 4 silicone-coated steel load cells. Display device: KERN KFN-TM. Benchtop stand incl. wall mount for display device as standard. Totalising of weights and piece counts
NFB Robust drive-through scale for rapid weighing of e.g. wire cage trolleys, shelf trolleys, container trolleys, storage trolleys, sack trucks, transpallets, mobile containers, containers refuse. Low platform height and integrated access ramps on both sides facilitate access. Weighing bridge: anti-slip corrugated steel plate lacquered, protection against dust and water splashes IP67, 4 silicone-coated steel load cells.



VFB /VHB /VFE Pallet Scales VFB PRE-TARE function for manual deduction of a known container weight. Load cells: protection against dust and water splashes IP67, temporary use in wet areas possible. Pivot range 180°.Castors: Solid rubber on aluminium rims. Load rollers: Tandem tyres to overcome thresholds and obstacles more easily. Material: Polyurethane. Net/gross weight: to control the consumed weighing range at the touch of a key. Totalising of weight. Rechargeable battery pack internal, standard, operating time up to 40 h without backlight, charging time approx. 12 h
VHB PRE-TARE function for manual subtraction of a known container weight, value can be saved. Display device: protection against dust and water splashes IP65. Load fork: protection against dust and water splashes IP67, temporary use in wet areas possible. Pivot range 206°.Castors: Solid rubber on aluminium rims. Load rollers: Tandem tyres to overcome thresholds and obstacles more easily. Material: Polyurethane. Totalising of weights. Ready for use: Batteries included (4×1.5 V AA). AUTO-OFF function to preserve the batteries. Operating time approx. 80 h / 1700 weighing.
VHE Highly versatile for general check weighing. Very manoeuvrable thanks to its compact construction and low weight. Particularly robust with its components having been relocated from the load fork into the protected housing area. It is therefore also ideal for heavy applications in the production area and on board trucks. Display device: protection against dust and water splashes IP65. Low height of the loading forks easy uplifting to work with low pallets. Pivot range 206°. Castors: Solid rubber on aluminium rims. Load rollers: Polyurethane.

UFB /UFC /UFN UFB High mobility: thanks to battery operation (optional) and compact, flat construction, it is suitable for use in several locations (production, warehouse, dispatch department. Load support: steel, lacquered, protection against dust and water splashes IP67, 4 silicone-coated steel load cells. 2 rollers and handle for easy transport of the scale. Weighing with tolerance range (check weighing): Input of an upper/lower limit value. A visual and audible signal assists with portion division, dispensing or grading or the rapid checking of items on palettes. Counting system: A counting scale can be connected using the data interface, and this can be used to create a high-capacity counting system for counting the very small parts in largest quantities. Totalising of weights and piece counts.
UFC High mobility: thanks to rechargeable battery operation (optional), compact, lightweight construction, it is suitable for the use in several locations. Load support: steel, lacquered, protection against dust and water splashes IP67, 4 silicone-coated steel load cells. Also available as component without the display device, KERN KFU-V20KERN KFU-V20. Weighing with tolerance range (check weighing): A visual and audible signal assists with portion division, dispensing or grading or the rapid checking of items on palettes. Counting system: A counting scale can be connected using the data interface, and this can be used to create a high-capacity counting system for counting the very small parts in largest quantities. Totalising of weights and piece counts.
UFN Suitable for the ever-increasing hygienic requirements in the food industry. 2 rollers and handle for easy transport of the scale. Hold function: When the weighing conditions are unstable, a stable weight is calculated determining an average value. Weighing with tolerance range (check weighing): Input of an upper/lower limit value. A visual and audible signal assists with portioning dispensing or grading. Totalising of weights. Display device KERN KFN-TM, stainless steel, IP67.Weighing bridge KERN KFU-V30, stainless steel, IP67.

Industrial & Commercial Platform Scales

CDS Platform Scale Self-explanatory graphic control panel, The counting process can be understood immediately even without operating instructions. Precise counting: The automatic reference weight optimisation of reference weight gradually improves the average piece weight value


 

Platform Scale DE High mobility: Battery or rechargeable battery (optional) operation, compact and flat construction and low weight make this scale ideal for use in several locations .Flexible positioning of display device: e.g. free-standing or mounted to the wall (optional). Display device IP65. Protected against dust and spray (only when using battery or rechargeable battery pack). PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels. With the recipe function you can weigh the different ingredients of a mixture. As a check, you can also call up the total weight of all the ingredients. Freely programmable weighing unit, e.g. display direct in special units such as length of thread g/m, paper weight g/m2, or similar



Platform Scales DS
High-capacity precision balance, ideal for high volume or heavy samples to be weighed with a high degree of accuracy. User guidance step by step on display by Yes/No dialogue. Numerical subtraction of tare weight for known container weight. Useful for checking fill-levels. Precise counting: The automatic reference weight optimisation of reference weight gradually improves the average piece weight value. Freely programmable weighing unit, e.g. display direct in special units such as length of thread g/m, grammage g/m2, or similar. Protective working cover included with delivery

 


EOA /EOB Platform Scales EOA High mobility: Battery operation, compact, flat construction and low weight make this scale ideal for the use in several locations. Simple and convenient 2-key operation.Weighing plate steel, lacquered. Adjusting program CAL, external test weights at an additional price. Ready for use: Batteries included (9 V Block), operating time up to 60 h.
EOB Weighing plate stainless steel, painted steel base. Simple and convenient 4-key operation. Wall mount for display device.Hold function: When the weighing conditions are unstable, a stable weight is calculated determining an average value


EOE /EOS Platform Scales EOE High mobility: Battery operation, compact, flat construction, recessed grips on the underside and low weight make this balance ideal for use in several locations. Wall mount for display device. Hold function: When the weighing conditions are unstable, a stable weight is calculated determining an average value
EOS Weighing plate stainless steel, painted steel base. Simple and convenient 4-key operation. Wall mount for display device. Hold function: When the weighing conditions are unstable, a stable weight is calculated determining an average value


IFB /IFS /IFT Platform Scales IFB Industrial quality: because of its stable construction and robust design, it is ideal for continuous use in an industrial environment. Platform: Weighing plate stainless steel, painted steel base, protection against dust and water splashes IP65, silicone-coated aluminum load cell. Platform can also be delivered without the display device. Display device: Superior display size, digit height 52 mm for the easy reading of weighing results, even under poor lighting conditions, KERN KFB-TM. Benchtop stand incl. wall mount for display device as standard. Level indicator and levelling feet for precise levelling of the scale, fitted as standard, to give the most accurate weighing results. Weighing with tolerance range (check weighing): Input of an upper/lower limit value. A visual and audible signal assists with portioning, dispensing or grading. Totalizing of weights and piece counts. Hold function: When the weighing conditions are unstable, a stable weight is calculated determining an average value.
IFS Industrial quality: heavy version for tough usage in industrial applications. Ergonomic display device with large keypad and high-contrast LCD display for easy entry and reading of, e.g., tare weights, reference weights, limit values etc.[/]99 item memories for master data such as reference weight, reference quantity, container weight (PRE-TARE). Precise counting: The manual reference weight optimization gradually improves the average value of the piece weight. Totalizing of pieces when counting. Three displays for total weight, piece weight, Total quantity. 100 item memories for master data, such as item number, PRE-TARE (container weight), reference quantity and reference. weight .
IFT High-quality, rapid processors allow efficient, delay-free operation. Large memory, e.g. for item master data, weighing data etc. the balance is the ideal solution when working with a large range of goods or where there are high requirements for record keeping and documentation. Convenient recipe weighing. A graphic signal helps when dosing individual recipe ingredients. An information column on the left hand edge of the screen allows you to see at a glance which ingredients have already been weighed (proportionately). Platform: weighing plate , painted steel base, silicone-coated aluminum load cell, protection against dust and water splashes IP65. Convenient piece-counting function. Platform: Stainless steel weighing plate, painted steel base, silicone-coated aluminum load cell, protection against dust and water splashes IP65.

Platform Scale IKT 80 memories for each operation mode, e.g., for check weighing, PRE-TARE, reference weight, target weight when dispensing etc. Convenient recipe weighing: 99 recipes each with 10 components each can be stored in plain text (IKT-M: 5 recipes with 7 components each). If one recipe ingredient is overweight, then the practical recipe adjustment function for when dosages are exceeded automatically calculates the new target weights of the other ingredients. The actual and target values and the proportionate percentage can then be printed. Multiplier function: recipes where the ingredients have been recorded as percentages can easily be multiplied when entering the new target weight is entered, target weight , which is ideal for the production of larger containers, bulk packs. Rapid function for shortened stabilization time with reduced readout. Control outputs (optocoupler, digital I/O) to connect relays, signal lamps, valves etc. (35 V / 80 mA).For particularly high counting accuracy, there is an option of combining the KERN IKT range with a high-precision reference balance to make a counting system, please enquire

 

ILJ /ILS /ILT /IXS Platform Scales ILJ /ILS Laboratory balance with separate display device: Ideal when working in a glove bag or under laboratory fume hoods. Particularly practical for weighing toxic, volatile or contaminated substances. Particularly suitable for compact, very dense samples, such as e.g. those in road construction or the construction industry. Robust construction of platform ensures stability, protects the weighing system and is durable enough for with everyday use. KERN ILJ-C: Automatic internal adjustment in the case of temperature change +/-3 °C and time-controlled every 3 hours. Internal memory for up to 999 weighing results, 1000 items or recipe ingredients, 100 container weights, 100 users. PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels. Weighing with tolerance range (check weighing): a visual signal helps with portioning, dispensing or grading. Totalizing of weights (manual/automatic). GLP/ISO record keeping of weight values with date, time, user ID, project and serial number in combination with an appropriate KERN printer. Density determination of liquids and solids. Step by step user guidance on display. The density is indicated directly on the display.
IXS Tough industry standard suitable for use in harsh industrial applications. Display device: Stainless steel, very high class of protection against dust and water IP68, for industrial applications, hygienic and easy to clean, with integrated power supply. Wall mount standard. Details: KERN KXS-TM. Flexible positioning of display device: e.g. free-standing or mounted to the wall. Superior display size: digit height 53 mm. Bright backlight for easy reading of weighing results, even in poor lighting conditions. Platform: weighing plate stainless steel, substructure in wing design, extremely resistant to bending , steel, lacquered, protection against dust and water splashes IP65, silicone-coated aluminum load cell. ESD drain to protect against electrostatic discharge e.g. for electrostatically-charged weighing objects or people who work with the scale
.

KFP /KFU /KXP Platform Scales KFP Stainless steel weighing plate, Painted steel base. 1 load cell, aluminum, silicone-coated, IP65, OIML-R60-approved, class III, 3000 e. Level indicator and levelling feet for precise levelling of the scale, fitted as standard, to give the most accurate weighing results
KFU Load area steel lacquered. 4 load cells, steel, silicone-coated, IP67, OIML-R60-approved, class III, 3000 e. 2 rollers and handle for easy transport of the scale. Level indicator and levelling feet for precise levelling of the scale, fitted as standard, to give the most accurate weighing results
KXP Stainless steel weighing plate, painted steel base, extremely resistant to bending, Substructure in wing design without any welded seams. 1 load cell, aluminum, silicone-coated, IP65, OIML-R60-approved, class III, 3000 e. Level indicator and levelling feet for precise levelling of the scale, fitted as standard, to give the most accurate weighing results
.

Platform Scale SFB /SFE /SFX SFB Ideal for the robust industrial applications. Scale entirely out of stainless steel. Load cell stainless steel, silicone-coated. Note: Silicone is not suitable for contact with aggressive substances such as acids etc. or for continuous use in wet areas. Stand to elevate display device, standard, for models with weighing plate size. Level indicator and levelling feet for precise levelling of the scale, fitted as standard, to give the most accurate weighing results

SFE Platform scale protected to IP65 with stainless steel display device, for industrial applications, hygienic and easy to clean. Platform: weighing plate stainless steel, painted steel base, protection against dust and water splashes IP65, silicone-coated aluminum load cell. Display device: stainless steel, protection against dust and water splashes IP65, for industrial applications, hygienic and easy to clean, Flexible positioning, e.g. free-standing or mounted to the wall, KERN KFE-TM. Weighing with tolerance range (check weighing): Input of an upper/lower limit value. A visual and audible signal assists with portioning, dispensing or grading. Hold function: When the weighing conditions are unstable, a stable weight is calculated determining an average value. PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels.
SXS Ideal for the robust industrial applications. Platform: IP67, made entirely of stainless steel, silicone-coated stainless load cell. Substructure in wing design, extremely resistant to bending. Display device: IP68, very high class of protection against dust and water. Integrated power supply. Wall mount standard. Superior display size: digit height 55 mm. Bright backlight for easy reading of weighing results, even in poor lighting conditions. ESD drain to protect against electrostatic discharge e.g. for electrostatically-charged weighing objects or people who work with the scale

KERN Counting Scales & Price Computing Scales

Counting Scale CCP /CCS /CCT With this highly-accurate counting system KERN CCS you can replace a large spectrum of individual counting scales. This professional KERN CFS counting scale, which can also be used as a stand-alone scale, meets the highest demands for accuracy, weighing range and volume of items, by being connected to a high-capacity weighing bridge. Programmable using numerical key pad:- required reference quantity - known reference weight
Three displays for total weight (verifiable), piece weight, Total quantity. Memory (PLU) for 100 items with additional text. Fill-to-target function: Programmable target weight. An acoustic and visual signal will be displayed when the target value is reached. Precise counting: The automatic reference weight optimisation of reference weight gradually improves the average piece weight value .Quantity scale KERN KFP: The high-accuracy quantity counting takes place on the weighing platform (= weighing bridge) KERN KFP. Stainless steel platform, painted steel base. Aluminium single point load cell (1 x 3000 e), IP65 protection

 

Counting Scale CDS /CFS /CKE CDS Self-explanatory graphic control panel, The counting process can be understood immediately even without operating instructions. Precise counting: The automatic reference weight optimization of reference weight gradually improves the average piece weight value.
CFS Memory (PLU) for 100 items with additional text, reference weight and tare weight, e.g. of a container. Weighing with tolerance range (check weighing), ideal for portioning, dispensing, grading. Programmable using numerical key pad: Fill-to-target function: Programmable target weight. An acoustic and visual signal will be displayed when the target value is reached. Precise counting: The automatic reference weight optimization of reference weight gradually improves the average piece weight value. PRE-TARE function for manual subtraction of a known container weight, useful for checking fill-levels.
CKE Self-explanatory graphic control panel, counting process can be understood immediately, even without operating instructions. Precise counting: The automatic reference weight optimization of reference weight gradually improves the average piece weight value. Two scales in one: Switching from counting mode to weighing mode at the touch of a key. Optional battery operation, only for models with weighing plate size W×D 340×240 mm, batteries 6×1.5 V Size C not standard, operating time up to 40 h

 

CPB Counting Scale Precise counting: The automatic reference weight optimization of reference weight gradually improves the average piece weight value. Programmable using numerical key pad: Three displays for total weight (verifiable), piece weight, total count. Counting results memory: adds up all individual piece counts, result is shown in total weight and total pieces. Audible Fill-to-target: target quantity or target weight can be programmed, e.g. for check weighing. When the target value is reached, a signal will sound. PRE-TARE function for manual subtraction of a known container weight, value can be saved. High mobility: thanks to battery operation (optional), compact, flat construction and low weight, it is suitable for use in several .Two balances in one: Changes from counting mode to weighing mode at the touch of a key


Counting Scale CXB Precise counting: The automatic reference weight optimization of reference weight gradually improves the average piece weight value. Programmable using numerical key pad: Audible Fill-to-target: target quantity or target weight can be programmed. When the target value is reached, a signal will sound. Counting results memory: adds up all individual piece counts, result is shown in total weight and total piece. Energy management: Backlight turns off after 5 sec. Two balances in one: Changes from counting mode to weighing mode at the touch of a key. PRE-TARE function for manual subtraction of a known container weight, value can be saved


RIB /RPB Price Computing Scales RIB Elevated display backlit, on column, height of stand approx. 530 mm, only RIB-HM, must be ordered at purchase. Second display on the rear of the balance (only with models without the elevated indicator). Three displays for weight (verifiable), unit price, total price. Soil-resistant construction with water channels at the edge of the housing and sealing rings over the upper housing inlets.
RPB Elevated display backlit, revolving on column, height of stand approx. 480 mm, only -HM, must be ordered at purchase. Second display on the rear of the balance , standard (only with models without the elevated indicator). Memory (PLU) for 10 article prices. Auto-clear-key: Unit price entry is automatically set to zero when scale is unloaded. High mobility thanks to its rechargeable batteries (optional) and low weight

Hanging Scales, Crane Scales, Spring Balances

HFA /HFB /HFC Crane Scales HFA With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety). With its high-quality finish, low weight and compact dimensions, this crane scale (tensile force gauge) is an essential device for industrial use, on building sites, in freight centers, ports etc. Because of its compact design it is also ideally suited for installation in systems where space is limited, etc. Peak load display (peak hold). Hold function: When the weighing value remains unchanged the weight indicated on the display is automatically "frozen" until the HOLD key is pressed. Tare: Resets the display to "0" when there is a load on the scale.
HFB With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety). High mobility: thanks to battery operation, compact construction and low weight, it is suitable for use in several locations. Second display on the rear of the balance. Hook with safety catch, revolving. Shackle and hook connection made of nickel-plated stainless steel. Rechargeable battery pack internal, standard, operating time approx. 30 h, charging time approx. 14 h with mains adapter, charge indicator visual using LED. Hold function: When the weighing value remains unchanged the weight indicated on the display is automatically "frozen" until the HOLD key is pressed. Tare: Resets the display to "0" when there is a load on the scale. Now removed or added loads are directly displayed. Radio remote control standard. Range up to 20 m. All functions can be selected (excl. ON/OFF). W×D×H 48x10x95 mm. Batteries included (2 x 1,5 V AAA)
HFC With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety. Peak load display (peak hold. Hold function: When the weighing value remains unchanged the weight indicated on the display is automatically "frozen" until the HOLD key is pressed. Tare: Resets the display to "0" when there is a load on the scale. Now removed or added loads are directly displayed. Display device with integrated radio module

 

HFM /HFO /HFT /HTS Crane Scales HFM With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety). High mobility: thanks to battery operation, compact construction and low weight, it is suitable for use in several locations (production, warehouse, dispatch department etc.). Hook with safety catch, revolving. Rechargeable battery pack internal, standard, operating time approx. 50 h, charging time approx. 14 h with mains adapter, charge indicator visual using LED. Hold function: When the weighing value remains unchanged the weight indicated on the display is automatically "frozen" until the HOLD key is pressed. Tare: Resets the display to "0" when there is a load on the scale. Now removed or added loads are directly displayed. Radio remote control standard. Range approx. 20 m. All functions can be selected (excl. ON/OFF). W×D×H 48x10x95 mm. Batteries included, 2 x 1,5 V AAA
HFO With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety).High mobility: thanks to battery operation, compact construction and low weight, it is suitable for use in several locations. High resolution readout: Read-out [d] for 5 sec increased by one decimal place at the touch of a key, only for models with EC type approval. Hold function: When the weighing value remains unchanged the weight indicated on the display is automatically "frozen" until the HOLD key is pressed. Tare: Resets the display to "0" when there is a load on the scale. Now removed or added loads are directly displayed. Hook with safety catch, revolving.
HFT With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety).Weighing unit without display, therefore very robust. Hold function: When the weighing value remains unchanged the weight indicated on the display is automatically "frozen" until the HOLD key is pressed. Hook with safety catch, revolving. Display with integrated radio module, in this way the weighing data can easily be read off the display by the user, even if the user might find himself in a remote distance from the crane scale. Range up to 100 m. The integrated RS-232 data interface allows from connection to a printer, PC or network .
HTS With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety).High mobility: thanks to battery operation, compact construction and low weight, it is suitable for use in several locations (production, warehouse, dispatch department etc.).Range of tare: 100 % of [Max].LED display with Gross/Tare/Net. Standby function: display automatically switched off after 5 min without a change of load. Automatic activation with the touch of a key. are: Resets the display to "0" when there is a load on the scale. Now removed or added loads are directly displayed. Hook with safety catch, non-revolving. Infrared remote control standard. Range up to 8 m. All functions can be selected. W×D×H 65×24×100 mm. Batteries included, 9 V

CH / HCB/ HCN/ HDB Hanging Scales CH Hold function: For easy reading of the weighing result, the display can be "frozen" in different ways. Either automatically when the weighing value remains unchanged or manually by pressing the Hold key. Hook (stainless steel). Tape measure, extractable, length approx. 100 cm. Peak load display (peak hold), measuring frequency 5 Hz. Ready for use: 9 V Block included, operating time up to 20 h. AUTO-OFF function to preserve the batteries, can be switched off
HCB Hold function: For easy reading of the weighing result, the display can be "frozen" in different ways. Either automatically when the weighing value remains unchanged or manually by pressing the Hold key. Peak load display (peak hold), measuring frequency 5 Hz. HCB with [Max] ≥ 0,5 t: Reinforced version for heavy loads. Snap link and Hook not included.
HCN Multi data hold function: Peak load display (peak hold), measuring frequency 5 Hz. Housing stainless steel, IP65 protection. Second display on the rear of the balance.
HDB Ideal for rapid control in goods-in and goods-out. Essential too in the private sector to determine the weight of fish, game, fruits, bicycle parts, suitcases. Hook (stainless steel), can be hinged. Ready for use: Batteries included, 2×1.5 V AAA, operating time up to 180 h, AUTO-OFF function to preserve the batteries

 

 

 

 

 281 /285 /287 Spring Balances Aluminum scale tube: robust, long service life, rustproof Non-fatigue stainless steel spring

 

 

 

Test Weights


A balance can never be more accurate than the test weight used to adjust it. The accuracy of the test weight and its tolerance should correspond to the readout of the balance. The weight size should be the heaviest weight that the balance or scale can weigh. Test weights are classified in accordance with the OIML accuracy classes. The classes range from E1 through M3. Except F1 Class non OIML weights

E1 Series

E1 Milligram Weights, Single weight Wire Shaped
E1 Stainless Steel Weights
E1 Stainless Steel Weights, Sets in Wooden Box. Sets from 1mg - 50g to 1g - 10kg
E1 Test Weights Single wire shape < 500mg
E1 Test Weights Optional DAkkS (DKD) Calibration with certificate



E2 Series

E2 Milligram Weights Flat Polygonal shape
E2 Stainless Steel Weights Sets of weights in wooden or plastic boxes. Sets from 1mg – 50g to 1g – 10Kg
E2 Single Weights, Stainless Steel
E2 Cylindrical Stainless Steel Single Weights
E2 DAkkS (DKD) Calibration

F1 Series

F1 Milligram Weights Flat polygon shape
F1 Sets of Weights Stainless steel in plastic box. Sets from 1mg - 50g and 1g - 5Kg
F1 Sets of Weights Stainless steel in wooden box. Sets from 1mg - 50g and 1g - 10Kg
F1 Test Weights Single Stainless steel weights, compact shape
F1 Single Weights Stainless steel
Not in accordance with OIML, adjusted to error limit class F1

 

 

F2 Series


F2 Milligram Weights
Flat polygonal
F2 Single Weights Single Stainless steel weights
F2 Sets of Weights Sets of Weights in plastic and wooden boxes. Sets from 1mg – 50g and 1mg - 5Kg
F2 DAkkS (DKD) Calibration
 

 



M1 Series


M1 Milligram Weights
Flat Polygonal
M1 Hook Weights, M1 Slotted Weights Brass Hook and slotted weights in plastic and wooden boxes. Weights in Newtons
M1 Large Rectangular Weights Up to 500Kg with test weights
M1 Sets of weights Sets of weights from 1mg - 50g to 1g - 10Kg. In wood or plastic boxes
M1 Hook Weights Test weights
M1 Slotted Weights Test weights


 

M2 Series

M2 Single Weights
M2 Sets of Weights